SCCM - How to Deploy an Image to a Computer

Requirements:

Older Dell computers may need to have the UEFI network stack enabled
- This can be enabled via the BIOS under Network settings
Newer Dell computers will need the storage controller set to AHCI instead of RAID
- Turn secure boot to OFF
- This can be done via the BIOS under Storage settings

Instructions:

Verify computer is off
Power on computer and hit F12 to bring up One Time Boot Menu
Select Ethernet (IPV4) or USB NIC (IPV4) depending on how the computer is connected
Verify computer receives an IP and hit Enter when prompted
1. If the computer does not receive an IP make sure the computer isn't already in Configuration Manager
  1. Search for it under \Assets and Compliance\Overview\Devices\All Desktop and Server Clients\
  2. Use either the known computer name or MAC address of the ethernet port
When the boot environment had loaded you will be prompted to input a password. See below for imaging password.
1. Thurber@1969
Next you will need to select what image you want to deploy
After selecting the deployment image you will see a prompt to input the computer name. Please use the following naming convention:
1. First 3 letters of the building, room number, asset tag
  1. Example: HOL312-18323
Deployment process will very depending on network traffic and the image that is being deployed.
1. Staff images should take 30-45 minutes
2. Lab images can take up to 3 hours during peak traffic times